Watch Out: How Ghost 2 Immobiliser Is Taking Over And What To Do About It

Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser

The revolutionary Ghost immobiliser shields your car from key-long and relay theft. With a personalised PIN sequence, unless they have the correct code, your car won't be able to start!

It also has Transport Mode that allows you to temporarily disable the device and is perfect for vehicle transportation and servicing. The device then activates by entering a PIN code again.

No Key Fobs or Indicators with Leds

The Ghost 2 immobiliser offers a strong defense against modern car theft techniques. Its invisibility and engine start blocking reduces the chance of theft, giving you peace of mind as well as saving money on insurance.

It isn't detectable by scanners and cannot be hacked with common methods like key cloning and signal jamming. The device makes use of buttons on your vehicle such as those on the steering wheel, door panels, and the center console to generate a unique, changeable PIN code sequence that is up to 20 presses in length. Only the owner of the vehicle will be able to start the engine when the correct sequence or a beacon or mobile app is utilized. This adds an additional layer of security against thieves.

You can also enable an easy service mode for situations such as valet parking or servicing that require you to temporarily disable the system. The mobile app makes it easy to do this, ensuring that your vehicle is safe during the time it is being repaired. It is easy to revert back to secure mode once the job is complete to ensure your vehicle is secure throughout the day.

Unlike other immobilisers from the aftermarket that use a fob The Ghost 2 can be operated directly via the existing buttons, making it more user-friendly than conventional systems. The application can also be used as a spare key in case of emergency. This allows you to drive while your security is turned off, without having to enter a pin code.

No Radio Frequency Signals

Unlike traditional security systems that have their own dedicated remote The Ghost 2 immobiliser doesn't require any additional key fobs or keys and can be used with buttons already on the steering wheel or the centre console. The device is also undetectable by thieves using RF scanning or code grabbing technology, which means your car won't even start for them even if they do get your keys.

The device locks the engine by using an unique sequence of buttons. This personalised PIN code can be entered through the app or using the existing buttons on the steering wheel and centre console. This allows you to also lock the gearbox which means that your car can't be driven away until you have a key or are able to enter your pin code. The device can be set to transport mode, which allows you to drive the car without having to enter your pin code. This will provide extra security for your vehicle when it is left to service or valet park.

The Ghost 2 immobiliser is designed to serve as a deterrent for theft that is as discrete as possible, which makes it a desirable choice for those who've spent an enormous amount of money making their vehicles more unique or have very expensive or rare cars. Many have reported that this is a great option to guard their cars from being stolen and even share stories of attempted thefts that have been stopped by the device. The Ghost 2 also offers a wide range of options with many customers reporting that it can be used with regular car keys as well as with the vehicle's emergency button, giving them peace of mind when they are away from their vehicle.

No Radio Frequency Scanners

Ghost immobilisers guard your vehicle from key copying and theft. The system uses the buttons inside your vehicle, for example the ones on the dashboard and your steering wheel, to create a unique, changeable button sequence that only you can identify. Your car won't begin without this sequence. This combination of a unique disarm sequence and the absence of radio frequency signals makes it extremely difficult to penetrate or evade.

The Ghost CAN Immobiliser is a safer alternative to Thatcham approved devices that rely on radio frequencies scanning. It operates completely silently, without external signals and does not depend on any external signals. It is a safer alternative and can be insured if installed by an installer who is TASSA-approved (we are one of them!) ).

Due to the nature and way in which the Ghost immobiliser works with your vehicle, it is strongly recommended to have an experienced installer perform its installation. This will ensure that it is seamlessly integrated into the vehicle's systems, leading to optimal performance and a lower chance of malfunction.

Additionally, professional installation often comes with warranties and service that further increase the value of your investment. This is a major security feature that deters thieves who are less likely to attempt any attempts at bypassing the device as a result of its extensive security features and skilled installation.

As well as an excellent deterrent against thieves As well as a great deterrent to thieves, in addition to being a great deterrent for thieves, Ghost is designed to be user-friendly too. It can be set to automatically re-arm a certain amount of time after you have parked your vehicle. This way, you don't need to remember your PIN every time. It also offers the option of Service/Valet Mode if you need to hand your vehicle to a service or valet parking, which can be disabled or enabled depending on your preference. a simple indication sequence.

No Wire Cutting

The Ghost 2 is non-invasive and doesn't require cutting of wires during installation. It connects to your vehicle's CAN data network and is programmed with a unique PIN. This prevents anyone else from starting the engine if they do not have a specific sequence of PINs or an app authorisation.

It is also unnoticeable by the specialist scanning tools which some thieves use and is silent as it doesn't send out radio signals like other immobilisers. It is weatherproof, sealed and small enough to hide anywhere within the vehicle.

Another added benefit of the Ghost II is that it can be turned into "transport mode" for short periods without the need for an individual PIN sequence. This is ideal for situations such as lending the car to a family member or friend or in emergency situations which allows you to start your vehicle and leave quickly and safely.

It's important that you work in a well-lit area when installing the Ghost II. You should also wear safety gear while working with electrical components and tools. A basic set of hand tools will allow you to make precise connections while a multimeter will help determine electrical values and ensure that your wiring is safe. Cable tie and insulation tape can be used to shield any wires that are cut or exposed or to join them during the installation.

It is also essential to disconnect the battery prior to trying any wiring work on your vehicle. This will stop any airbag deployments or electrical shocks when the Ghost II is connected to the vehicle's electrical system while the battery is disconnected.

Easy to Install

car immobiliser ghost  is a distinctive next-generation device that works by connecting directly to your vehicle's CAN Data Network and using a personalised PIN Code to prevent your vehicle from beginning. This makes it much more difficult to crack than conventional alarm systems or after market key fobs, and provides superior security against key cloning hacking and relay attacks.

The device can be hidden within your vehicle and utilises the buttons already on your dashboard and the steering wheel to create a sequence that only you can recognize. This stops thieves from using a stolen car key to open it and also stops them from using an instrument for diagnosing that thrives on hacking OBD.

Installation is easy and does not require cutting wires. The unit is connected to the vehicle's CAN bus via an unchanging 12V supply and a grounding connector. Basic hand tools are sufficient for installation, and a multimeter will assist in locating the right wires. Insulation tape or heat shrink tubing is recommended to shield the connections and cable ties can be used to keep the wiring tidy and organised.

After installation, the unit enters into a learning mode that captures your specific buttons or sequences to generate your unique pin code. The information is stored in the CAN data network, making it nearly impossible for anyone else to replicate your sequence and start your car.

Transport Mode is a function that can be used in the event of an emergency, such as if you forget your PIN code, sell your vehicle, or the button is not working. This will disable the Ghost System completely, but it will be activated automatically when you exceed 31mph for longer than 15 minutes or enter your PIN Code. This is ideal for people who regularly rent out their vehicles via services such as Turo or ZipCar.